Technology deep dives

Hard carbon anode: the bottleneck that decides sodium-ion

GetFocus

·

November 20, 2026

·

8

min read·Updated

Hard carbon anode: the bottleneck that decides sodium-ion

Stay ahead of the curve

Get exclusive insights delivered directly to your inbox. Join thousands of tech leaders.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

TL;DR

  • Sodium-ion cells use hard carbon because graphite stores less than 50 mAh per gram of sodium, against 372 with lithium (Molecules, 2022).
  • Hard carbon is the only commercial anode option (SMM, 2026) and limits energy density (Fraunhofer FFB, 2025). Chinese producers were running close to full capacity in mid-2026 (SMM).
  • Hard carbon anode routes improve at about 110–131% a year against about 46% for graphite; precursor processing reads about 86% (GetFocus sodium-ion webinar, 2026).
  • The reading is directional. It shows which layer to scout and monitor, and it leaves price and supplier choice to you.

A hard carbon anode is the negative electrode in commercial sodium-ion batteries, made from a disordered carbon that stores sodium where graphite stores almost none. It is the bottleneck for sodium-ion because it holds back the cell's energy density (Fraunhofer FFB, July 2025) and because, in Shanghai Metals Market's January 2026 assessment, capacity for it is tighter than for the cathode.

We build GetFocus, which measures how fast technologies improve from the way patents cite each other. The anode readings in this article are from the GetFocus sodium-ion webinar (2026), the chemistry-level rates are on our live sodium-ion radar, and every public figure links to its source. The question for an R&D or strategy leader is a practical one: when a whole technology looks fast, which layer underneath it sets the pace, and how early can you see it?

What is a hard carbon anode?

Hard carbon is a form of carbon that keeps its disorder even above 2,800 °C, which is why chemists also call it non-graphitizing carbon. A 2022 review in the journal Molecules describes its structure as small regions of curved graphene sheets with a wealth of nanopores between them.

Picture graphite as a ream of paper, every sheet flat and tightly stacked. Hard carbon is the same paper crumpled and pressed into a block, with uneven gaps between the sheets and small pockets throughout.

Producers make it by carbonising a carbon-rich starting material, called the precursor, at high temperature. The review lists sugars, cellulose, lignin, plant waste such as fruit peel and apricot shell, and synthetic resins such as phenolic resin. In China, the mainstream industrial route starts from coconut shell, according to Shanghai Metals Market (SMM).

Why can't sodium-ion batteries use graphite?

Graphite is the standard anode in lithium-ion batteries, where it stores 372 mAh per gram. With sodium in a conventional carbonate electrolyte, the same review reports that its capacity drops below 50 mAh per gram, because sodium forms no stable compounds between graphite's layers.

Hard carbon's layer spacing and pores give sodium places to sit. A 2025 review in Nano-Micro Letters puts its reversible capacity at about 300 mAh per gram without modification, and at 350 to 500 with engineered closed pores.

That capacity comes with two penalties. The Nano-Micro Letters review names lower energy density and lower first-cycle efficiency among the barriers to wider use of sodium-ion batteries, and it puts the first-cycle efficiency of engineered hard carbons at 80–90%. In plain terms, 10–20% of the first charge is lost for good.

Why is the hard carbon anode the bottleneck for sodium-ion?

The public record gives three reasons.

  • Energy density. A study by Fraunhofer FFB and the University of Münster, published in Energy & Environmental Science in 2025, modelled the sodium-ion cell chemistries that manufacturers are pursuing, at gigafactory scale. Its press release reports that sodium-ion cells currently store less energy than LFP cells, especially by volume, and that hard carbon has a significantly lower specific energy than graphite. Simon Lux, director of Fraunhofer FFB, said: "Hard carbon is still the bottleneck in terms of energy density today."
  • One option. Cell makers use different cathode materials, and the same release notes that hard carbon is the dominant anode material. SMM calls it the only anode option in commercial sodium-ion batteries today, so a weakness in the anode reaches every commercial cell, whichever cathode it uses.
  • Supply. In January 2026, SMM put China's usable hard carbon capacity at no more than 100,000 tonnes. It wrote that the coconut-shell route faces pressure on raw-material sustainability, and that coal, bamboo and other biomass routes still need better product performance. In July 2026, output was up 101% on a year earlier and mainstream producers were running close to full capacity.

The same press release carries the other half of the story. Hard carbon takes far less energy to produce than synthetic graphite, which lowers both the emissions and the cost of the anode, and the authors say targeted material improvements can narrow the gap to LFP and close it for some cell chemistries.

Who makes hard carbon, and what does it cost?

Outside China, two companies show the range of starting materials. Kuraray in Japan sells Kuranode, a plant-based hard carbon that it lists as suitable for sodium-ion batteries. Stora Enso in Finland makes Lignode from lignin, a by-product of pulp production, and agreed in June 2024 to adapt it for the sodium-ion cells of the Swedish developer Altris.

Inside China, SMM describes a tiered market without naming companies. In its September 2026 review, top-tier producers shipped several hundred tonnes a month and second-tier producers around a hundred. One producer that has stated its scale is Shengquan Group, which announced in March 2026 a hard carbon line with a capacity of 10,000 tonnes.

On cost, the open record is thin. CarNewsChina reported in July 2026 that hard carbon had fallen below 30,000 yuan a tonne, with supplier roadmaps aiming for under 20,000. The report names no primary source for those figures, and we found no open price series to check them against.

What SMM does report is the pressure on producers. In the same September review, it wrote that mainstream producers were running essentially full while the industry lost money on every tonne sold. HiNa's figures on our radar put sodium-ion at 0.5–0.7 yuan per Wh against 0.3–0.5 for lithium, with the two ranges projected to converge around 2027.

We read a supplier base that is running at full capacity and unprofitable at the same time as a layer that is still being industrialised.

What does the improvement rate say about the hard carbon anode?

The improvement rate is how much a technology's performance improves per year, read from how patents build on each other. It works like an interest rate: each year's gain builds on the last. On our live radar, sodium-ion drew level with LFP in 2019 (71.0% against 70.7%) and reads 124.9% a year against 64.8% from 2023. Whether that is enough to displace LFP is the subject of a separate article.

The anode layer has its own readings. These are from the GetFocus sodium-ion webinar (2026), with readiness on the TRL scale of 1 to 9:

  • Biomass-derived hard carbon: about 131% a year, TRL 7.
  • Hard-carbon sodium-ion anodes: about 128% a year, TRL 8.
  • Low-first-cycle-loss hard carbon: about 110% a year, TRL 7.
  • Graphite anodes, the lithium-ion incumbent: about 46% a year, TRL 8.

All three hard carbon routes improve at more than twice graphite's rate, at a readiness of 7 or 8. Our article on technology readiness level explains why the two measures are read together: readiness says how mature a route is, and the rate says how fast it is moving. One of the routes targets the first-cycle loss described above, so that weakness has its own line of invention.

The slower reading is one step upstream. In the same webinar's manufacturing table, hard-carbon precursor processing reads about 86% a year at TRL 7. That is the lowest of the four sodium-ion manufacturing routes listed, and sodium-ion cathode synthesis reads about 208%.

So the material is improving faster than the processing of what it is made from. The webinar's advice: treat hard carbon as a supplier-scouting and cost-monitoring priority, and map sodium-ion suppliers by chemistry route, each paired with credible access to hard carbon.

How do you find the bottleneck layer in your own technology?

  1. Split the technology into layers. For a battery that means cell platform, cathode, anode, electrolyte and manufacturing.
  2. Read the rate and the readiness of each layer. A fast headline number can sit on top of one slow layer. Our guide to comparing competing technologies objectively covers how to keep the comparison like for like.
  3. Find the layer with the fewest alternatives. Sodium-ion has several cathode materials and one commercial anode material, so the anode carries risk for every cell.
  4. Read the material and its processing separately. Here the anode routes read 110–131% a year and precursor processing about 86%.
  5. Re-read on a schedule. A bottleneck moves when a new route matures. Our patent monitoring page describes re-checking a domain weekly, monthly or quarterly, and invest now or wait covers the timing question.

What are the limits of this reading?

  • It is directional. The improvement rate is an estimate from citation patterns and carries measurement error. A gap of 110–131% against 46% is a clear signal. Treat the difference between 128% and 131% as noise.
  • The anode figures come from one readout. They were presented in the 2026 webinar. The public radar page names hard carbon as the control point and leaves the anode rates out.
  • A rate describes technical progress. Price, delivered tonnes and supplier choice need other evidence, and the supply facts here come mainly from one market source in China.
  • The history test covers whole technologies. In our backtest of car powertrains, batteries read faster than hydrogen fuel cells at every reading from 2001. The layer-level readings in this article have had no public test of that kind.

Your technology may have its own hard carbon: one layer with a single option and a tight supply base. Send us one live technology decision and get a free 48-hour Decision Brief: a first-pass radar of the competing options, their improvement rates and the layers worth a closer look.

FAQ

What is a hard carbon anode made of?

A hard carbon anode is made of non-graphitizing carbon: small regions of curved graphene sheets with many nanopores between them. Producers carbonise a carbon-rich precursor such as plant waste, lignin or resin at high temperature. The mainstream industrial route in China starts from coconut shell, according to Shanghai Metals Market.

Why can't sodium-ion batteries use graphite?

Graphite stores 372 mAh per gram with lithium, and less than 50 mAh per gram with sodium in a conventional carbonate electrolyte, according to a 2022 review in Molecules. Sodium forms no stable compounds between graphite's layers. Hard carbon's layer spacing and pores store about 300 mAh per gram without modification.

Why is hard carbon the bottleneck for sodium-ion batteries?

Hard carbon has a significantly lower specific energy than graphite, and Fraunhofer FFB's director called it the bottleneck for sodium-ion energy density in July 2025. Shanghai Metals Market calls it the only anode option in commercial sodium-ion cells and reported Chinese producers running close to full capacity in mid-2026.

Who makes hard carbon for sodium-ion batteries?

Kuraray in Japan sells Kuranode, a plant-based hard carbon it lists as suitable for sodium-ion batteries. Stora Enso in Finland makes Lignode from lignin and agreed in June 2024 to adapt it for Altris's sodium-ion cells. In China, Shengquan Group announced a 10,000-tonne hard carbon line in March 2026.

Ready to see it in action?

Bring us one technology decision you're weighing. We'll send back the competing routes mapped by improvement rate and maturity.

Talk to us